Part Number Hot Search : 
FDV302 IMP37 UCC39161 MA5J002E RN2414 143EC GPTK2126 74F82300
Product Description
Full Text Search
 

To Download UG30A Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 UG30APT thru UG30DPT
Vishay Semiconductors
formerly General Semiconductor
Dual Ultrafast Plastic Rectifier
TO-247AD
0.245 (6.2) 0.225 (5.7) 0.645 (16.4) 0.625 (15.9) 0.323 (8.2) 0.313 (7.9) 0.203 (5.16) 0.193 (4.90) 0.078 REF (1.98) 10
Reverse Voltage 50 to 200V Forward Current 30A
Features
30
0.170 (4.3) 0.840 (21.3) 0.820 (20.8) 0.142 (3.6) 0.138 (3.5)
10 TYP. BOTH SIDES
* Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Ideally suited for use in very high frequency switching power supplies, inverters and as a free wheeling diodes * Ultrafast, 15 nanosecond typical recovery time * Low leakage current * Glass passivated * Soft recovery characteristics * Excellent high temperature switching
1
2
3
0.086 (2.18) 0.076 (1.93)
1 REF. BOTH SIDES 0.118 (3.0) 0.108 (2.7)
Mechanical Data
Case: JEDEC TO-247AD molded plastic body over passivated chips Terminals: Plated leads solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250C, 0.16" (4.06mm) from case for 10 seconds Polarity: As marked Mounting Position: Any Weight: 2.2 oz., 6.3 g
Ratings at 25C ambient temperature unless otherwise specified.
0.127 (3.22) 0.160 (4.1) 0.140 (3.5) 0.795 (20.2) 0.775 (19.6) 0.117 (2.97) PIN 1 PIN 3
PIN 2 CASE 0.030 (0.76) 0.020 (0.51)
0.225 (5.7) 0.205 (5.2)
0.048 (1.22) 0.044 (1.12)
Dimensions in inches and (millimeters)
Maximum Ratings & Thermal Characteristics
Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=120C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) at TC=120C Typical thermal resistance
(1)
Symbol UG30APT UG30BPT UG30CPT UG30DPT VRRM VRMS VDC IF(AV) IFSM RJC TJ, TSTG 50 35 50 100 70 100 30 300 2.0 -65 to +150 150 105 150 200 140 200
Unit V V V A A C/W C
Operating and storage temperature range
Electrical Characteristics
Ratings at 25C ambient temperature unless otherwise specified.
Maximum instantaneous forward voltage per leg at 15A 30A 10A TJ=100C Maximum DC reverse current at rated DC blocking voltage per leg Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Maximum reverse recovery time at IF=15A, VR=30V, di/dt=50 A/s, IRR=10% IRM Maximum recovered stored charge IF=15A, VR=30V, di/dt=50 A/s, IRR=10% IRM Typical junction capacitance at 4.0V, 1MHZ TJ= 25C TJ=100C TJ=25C TJ=100C TA =25C TA =100C
VF IR trr trr Qrr CJ
1.0 1.15 0.85 15 800 20 35 50 22 50 70
V A ns ns nC pF
Note: (1) Thermal resistance from junction to case per leg mounted on heatsink
Document Number 88762 03-Jul-02
www.vishay.com 1
UG30APT thru UG30DPT
Vishay Semiconductors
formerly General Semiconductor
Ratings and Characteristic Curves (TA = 25C unless otherwise noted)
Fig. 1 - Maximum Forward Current Derating Curve
36
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
1,000
Average Forward Rectified Current (A)
30 24
Peak Forward Surge Current (A)
Resistive or Inductive Load
TC = 120C 8.3ms Single Half Sine-Wave (JEDEC Method)
18
100
12
6 0 0 25 50 75 100 125 150 175
10 1 10 100
Case Temperature (C)
Number of Cycles at 60 HZ
Fig. 3 - Typical Instantaneous Forward Characteristics
100 1,000
Fig. 4 - Typical Reverse Leakage Characteristics
Instantaneous Forward Current (A)
Instantaneous Reverse Leakage Current (A)
10
TJ = 25C Pulse width = 300s 1% Duty Cycle
100
TJ = 100C
10 TJ = 25C
1
1
0.1
0.1
0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01 0 20 40 60 80 100
Instantaneous Forward Voltage (V)
Percent of Rated Peak Reverse Voltage (%)
Fig. 5 - Reverse Switching Characteristics Per Leg
60
Fig. 6 - Typical Junction Capacitance
100
Recovered Store Change / Reverse Recovery Time (nC/ns)
IF = 15A VR = 30V 50
di/dt = 150A/s di/dt = 20A/s di/dt = 100A/s di/dt = 50A/s di/dt = 100A/s di/dt = 150A/s di/dt = 50A/s di/dt = 20A/s
40 30
Junction Capacitance (pF)
10
20 10
TJ = 125C f = 1.0 MHz Vsig = 50mVp-p 1 0.1 1 10 100
0
0 25 50 75 100 125 150 175
Junction Temperature (C) www.vishay.com 2
Reverse Voltage (V) Document Number 88762 03-Jul-02


▲Up To Search▲   

 
Price & Availability of UG30A

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X